Kitchen remodeling is dramatic with new flooring. The most beautiful and durable flooring for kitchens is tile. Tile floors take time to install properly when kitchen remodeling, but once finished will last a lifetime. Tile flooring can add to the value of your home and they are simple to maintain.
Tile flooring is available in a number of materials, glazes, and designs including tiles made of ceramic, stone, porcelain, or slate for kitchen remodeling. They key to a great looking tile floor is in the installation.
You will need the following tools and materials to install a tile kitchen floor when kitchen remodeling.
Acrylic additive
Backer board
Carpenter's square
Chalk line
Circular saw
Dust mask
Gloves
Grout
Grout float
Hammer
Level
Mesh seam tape
Painter's tape
Pencil
Power drill
Pry bar
Putty knife
Razor knife
Safety goggles
Silicone caulk
Small pieces of wood for shims
Sponge
Tape measure
Thin set mortar
Tile
Tile cleaner
Tile cutters
Tile nippers
Tile sealer
Tile spacers
Towels
Trowels
1. Move everything that could be damaged out of the kitchen when kitchen remodeling. This includes furniture, appliances, pots, and pans, etc.
2. Prepare the under floor. Remove existing flooring and level the under floor. Use a leveling compound or install a new subfloor if necessary. It is tempting, but never install a tile floor over a vinyl floor. The tiles will eventually pop loose.
3. Remove the quarter round with a hammer and pry bar. Remove the baseboards only if necessary for fitting the tile underneath when kitchen remodeling.
4. Put down a backer board either 1/2 inch or 1/2 inch thick, depending on the height of the adjoining floor. Choose the recommended type of backer board for your tile.
5. Mix the thin set, making sure to follow the instructions. Spread the thin set evenly on the floor with a trowel and then put the backer board on top of it.
6. Find the center point of the room using the carpenter's square and tape measure. Snap straight chalk lines to follow when placing the first row of tiles against the furthest wall when kitchen remodeling.
7. Mix another batch of thin set. Apply it evenly to the backer board, starting in the center and following along the chalk line for the first row of tiles. Use strong pressure, making and "X" and smoothing it out. Install the first row of tiles over the thin set. Only install full tiles. Do not install tiles at the edges that need cutting. Do not walk on the floor. Let it dry for at least twenty-four hours.
8. After the full tiles have dried, make your cuts on the other tiles and install them. Let the cut tiles dry for twenty-four hours again when kitchen remodeling.
9. Mix the grout and apply it with a grout float according to the directions on the package. Let the grout set for at least twenty-four hours or as long as the manufacturer recommends on the package.
10. Clean the tiles off with water and a sponge. At this point, you are almost finished with this kitchen remodeling project.
11. Apply a sealer according to the manufacturer's specifications and let dry.
It is a long road, but well worth taking once you step onto that beautiful new tile kitchen floor you installed yourself.
Copyright 2008 - All Rights Reserved - www.remodeling-my-kitchen.com
